Eager to pursue work experiences, enhance my knowledge and skills, seeking opportunities to learn from professionals for growing a career. Experienced and interested in the R&D, laboratory analyst, production process engineer in chemical industry.
Sedang berjalan
Universitas Diponegoro
D4 • Teknik Kimia Industri • IPK 3.92
Juli 2024 - Januari 2025
Distribusi
PT Pupuk Indonesia (Persero) • Magang
Februari 2023 - Juni 2023
Process Engineer Internship
PT. Pupuk Kalimantan Timur - Departemen Proses dan Pengelolaan Energi • Magang
My Responsibilities:
1. Learned and presented about PFD and PID ammonia process, urea process, and utility process at PT. Pupuk Kalimantan Timur especially at Plant 5.
2. Coordinated with mentor and 10+ professional engineers for collected the data in Proses Pengelolaan Energi Department (PPE).
3. Evaluated Primary Reformer of ammonia Kaltim-5 Plant before and after turn around (actual) and compared with design data get good results with efficiency 95,86% and heat loss 4,14%.
4. Coordinated with 5+ operator DCS at plant 5 for discussed about troubleshoot in ammonia Kaltim-5.
5. Calculated the radiant section (arch, tunnel, superheater) with linear results actual and design.
6. Calculated the convection section hot fluid at 7 coils heat exchanger with optimal results based on actual and design data.
7. Designed the simulation flowsheet efficiency primary reformer plant 5 using Aspen Hysys.
8. Evaluated the efficiency heat absorption, heat lost, and heat transfer value at 7 coils heat exchanger of primary reformer until 81,62-84% with results increase after turn around plant.
9. Compiled result data laboratory test of natural gas and primary reformer Kaltim-5.
10. Visited in primary reformer when turn around Kaltim-3 with 5+ professionals to see replacement of catalyst and packing.
11. Completed the task to do unloading catalyst at urea formaldehyde concentrate (UFC) with 20+ partners.
12. Recorded the data indicator in the field based on parameter perform of primary reformer Kaltim-5.
13. Analyzed cost and benefit to repaired optimization of catalyst Nikel at primary reformer.
14. Gived an advice for result of evaluation primary reformer for sustainable process such as maintain the temperature and pressure, maintain purifier waste gas, and clean the rust and then accepted by 20+ process engineer at PPE Department.
Juli 2022 - Agustus 2022
Process Engineer Internship
PPSDM Migas Cepu • Magang
My Responsibilities:
1. Learned about Process Flow Diagram, Start Up and Shut Down Process Production Equipment, Trouble Maintenance Tools, Utility Process, and Wastewater Treatment Process.
2. Supervised temperature and pressure of Process Production from Crude Oil in to Pertasol (CA, CB, CC), Solar, and Residue in control room with Distributed Control System (DCS) tool and collaborated with 5 professional engineers.
3. Evaluated efficiency mass and heat transfer balance.
4. Completed task to measure volume residue and solar in the tank with good results.
5. Analyzed color (ASTM 1500), flash point (ASTM D92), pour point (ASTM D97), viscosity and density product in oil analysis laboratory with good results until 100% according to American Standard Testing and Material (ASTM).
6. Completed the task or project about Crude Distillation Unit Process with Distillation Atmospheric at PPSDM Migas Cepu.
April 2022 - September 2022
Student Internship
Industrial Chemical Engineering "Superior Research and Development University" • Part Time
My Responsibilities:
- Composed a Standard Operating Procedure (SOP) document and operated the Extractor, Blanching, Dewatering, Conveyor Dryer, and Spray Dryer to make de-caffeinated green tea process and success collaboration partnered with 10+ stakeholder and director of Indonesia Research Institute for Tea and Cinchona Gamboeng.
- Calculated and prepared equipment and materials research budget for 2 terms 70% and 30% for 1 year with funded more than 50 million.
- Collected and analyzed research data results using chemical instrument and statistic program and made the technical analysis results.
- Published the International journal indexed on scopus Q2 about “Multiple Response Optimizations of Green Tea De-Caffeinated Process for Stimulating Human Antibody”
September 2021 - September 2022
Student Internship
Industrial Chemical Engineering "Project World Class Research (WCR)" • Part Time
My Responsibilities:
- Collaborated with 5+ lecturers and published the Internasional journal indexed on scopus Q1 about “Multiple Response Optimizations on The Leached Spray Dried Bancha Green Tea towards Healthy Ageing”.
- Operated and maintenance the Spray Dryer to make bancha green tea powder.
- Prepared and treatment material of bancha green tea powder to good nanoemulsion and nanoparticle.
- Analyzed phenol, catechin, and caffeine content in green tea using Spectrophotometer UV-Vis with optimal results.
- Evaluated research data results using statistic and origin program and made the technical analysis report.
Juni 2021 - Februari 2023
Research Assistant Lecturer
Industrial Chemical Engineering Association • Part Time
My Responsibilities:
- Produced Biogas from manure, cabbage, and tofu waste with anaerobic digestion method.
- Checked methane gas content with high methane gas results 76% and linear data.
- Passed funded 30 million from for vocational research Diponegoro University to produced “Nanoemulsion from Cinnamon and Black Cummin Seeds for Preparation drug of Diabetes Mellitus Type 2 based on In Silico Study”.
- Presented the results of research about “Extraction Pectin from Albedo Watermelon using Microwave Assisted” at ICET Malaysia 2023.
- Helped the community service at instant ginger business at Klareyan to provided ginger grating and expired date and then succeeded to increase quality product and income until 10%.
April 2021 - Maret 2022
Supervision of Research and Development
Himpunan Mahasiswa Teknologi Rekayasa Kimia Industri (HMTRKI) SV UNDIP • Organisasi
My Responsibilites:
1. Directed a work program field of Research and Science such as Kuliah Tamu, Research Training (PKM, KTI, Mawapres, and Essay), Training Hysys, National Industrial Chemical Competition, and success to attended 100+ participants in each program.
2. Improved a quality program through development suggestions on 10+ concept event, sub-event, and partnered with 15+ professionals.
3. Supervised a staff to 10+ work program and evaluated work result of 12 staff research and get a good grade 85 (A).
Maret 2021 - Januari 2022
Vice Chairman of Regeneration Department
Forum Komunikasi Mahasiswa Islam (FKMI) SV UNDIP • Organisasi
My Responsibilites:
1. Performed a work program as a Chief Executive of Madrasah Rohis 2 (Leadership Webinar) and attended by 50 participants.
Maret 2021 - Oktober 2022
Staff of Education and Profession
Badan Koordinasi Kegiatan Mahasiswa Teknik Kimia Indonesia (BKKMTKI) Region III • Organisasi
My Responsibilites:
1. Accomplished Training Hysys BKKMTKI region III as a Public Relation and fulfilled target with 150 participants.
2. Co-authored and published the 6th edition Cryogenic Magazine about Renewable Revolution Green Energy.
3. Arranged Coordinator Issues region III about Anorganic Waste Management and attended with 55 participants.
4. Guided event at Sharing Session BKKMTKI region II about Prepare Life after Graduation with 60 participants.
5. Managed event as a Public Relation and success reached 65 participants in Webinar “Geothermal Dieng for Alternative Energy”.
6. Contributed to social media team and produced 5 Public Academic content for the community.
Maret 2021 - Januari 2022
Staff of Academic Research and Development
Student Executive Board (BEM) Vocational School Diponegoro University • Organisasi
My Responsibilities:
1. Organized a big program Vocational Research and Champions about KTI, Debate, and PKM as a Chief Executive attended by 200+ participants and success coached 20% people in Vocational School Diponegoro University.
Desember 2020 - Desember 2022
Project Innovative Product Research Development Student
Industrial Chemical Engineering Association • Pekerja Lepas
My Responsibilities:
- Made prototype product about “Ecobrick: Lightweight Bricks from Styrofoam Waste and Glass Powder with Tetris Game as Earthquakeresistant walls” with good standard specification results.
- Executed product about “Isotonic Drink from Parijoto Fruit to Prevent Oxidative Stress” and organoleptic analyzed good for 5+ peoples.
- Analyzed “ Ecogreen Development through Analysis of Tropical Cyclone Cempaka for Climate Change Mitigation” with optimal results.
- Produced “Edible Coating from Dara Clam Shells Waste and Passion Fruit Peel for Pos-Harvest Preservation” with good preservation for 2 month fruits and vegetables.
- Created business research “Handwash from Green Tea Dregs and Suji Leaves” and succeeded sold out 50 pieces.
- Achieved 2nd winner from research about ”Characteristic Biodegradable Plastic from Aren Starch and Dragon Fruit Peel Waste”.
- Achieved 3rd winner research about “Nanoparticle Theaflavin-Zingerone for SARS-COV2 Drug using Spray Dryer”.
Agustus 2022
Operating Technician Crude Distillation Unit Cerificate of Competence from BNSP
LSP PPSDM Migas Cepu • 19211 8131 2 0000009 2022
Certified from BNSP for Operating Technician Crude Distillation Unit is valid for 4 years (2022-2026). Number certificate:192118131200000092022.
The material tested is based on SKKNI Oil and Gas Industry Sector (K3 LL, CDU process
feed, start up and shut down equipment, and chemical handling).